Ceara de Soia SW46 - fulgi
Ceara de Soia SW46 - fulgi - shoplumanari.ro
Ceara de Soia SW46 - fulgi - shoplumanari.ro
  • SKU: 00011631

Soy Wax SW46 - flakes

VAT included / VAT excluded

Produced in https://cdn.shopify.com/s/files/1/0510/3065/5175/files/UE.png?v=1612648778



Soy wax SW46

It is a product made from soybeans. The wax is 100% soy, contains no other forms of additives and can be mixed with other types of wax.

Melting and casting

The pouring temperature must be around 58 °C - 60 °C , depending on the geometry of the container.
Attention: SW46 soy wax is specially created for pouring into containers. Casting in silicone molds is not recommended. For casting in silicone molds, it must be mixed with vegetable stearin, paraffin or beeswax. The latter have strengthening properties.

It can be used in mixtures with coconut wax, palm wax, rapeseed wax, beeswax, different types of paraffin or stearin (vegetable or non-vegetable)

Avoid heating above 85°C. These temperatures can lead to discoloration of the wax, poor adhesion and irregular surface. Make sure to stir all the time and stir the wax even as it melts. After melting, let the wax cool to ~60°C-65°C, add the perfume and mix well until the wax reaches ~58°C.

Casting temperatures can vary depending on the type and size of the mold, the perfume and paint used and the effects the candle maker wants to achieve. Greater adhesion to containers can be achieved by pouring at a temperature close to the hardening point (approximately 45 - 50 °C). The perfume must be added and mixed immediately before pouring, around 60°C. If you encounter difficulties with the pouring temperature, try a lower or higher temperature in steps of 5 - 10 °C. Consider pouring in preheated molds for better adhesion.


Waxed wicks tend to work best with SW 46 wax, but clean wicks can also be used with success. Following our tests, TCR wicks were specially chosen for this wax. As well as the wooden wicks, doubled for a more optimized combustion.


The containers must be clean and without contaminating substances. They should be at least at room temperature, although preheating them to 40°C-50°C can
it brings some amazing results. Warm ambient temperature (20°C), heated container and prevention of rapid temperature changes during cooling will reduce the probability of polymorphism / freezing.


You can use liquid or solid dyes specially created for soy wax.


SW 46 wax can hold between 5% and 10% perfumes; both pure organic oils and essential oils.

The benefits of SW46 soy wax:
- Non-toxic wax, without chemical additives
- Clean combustion, without smoke
- Natural and renewable source

Available weights: 1 Kg, 5 Kg, 10 Kg, 20 kg
Appearance: Flukes
White color